Model design and Building Merit Badge

Model design and Building
Merit badge requirements
Click here to go back Click here to print this list of requirements.

  1. Study and understand the requirements for personal safety when using such modelmaker hand tools such as: knife, scissors, handsaws, scratch awl, hammer, screwdriver, files, hand drills and drill bits, pliers, and wire cutters. Know what precautions to take when using flammable or hazardous products such as: glue, epoxy, paint, thinner, and paper protective equipment such as goggles to be used when grinding or drilling. Discuss why they are important before you begin your model-making project.

  2. Explain the uses for each of the following types of models: architectural, structural, process, mechanical, and industrial. Do research into the different types of materials that could be used in making these models.

  3. With your counselor's advice, select a subject from requirement 4 for your model project (no kits). Prepare the necessary plans to the proper scale, a list of materials to be used, and a list of the required tools. This model should be your own original work. Tell why you selected this subject.

  4. Do ONE of the following:

    1. Architectural Model: Build a scale model of a house you select to a scale of 1/4"=1'0" (50:1 metric). Discuss with your counselor the materials you intend to use the amount of detail required, house outside treatment (finish, shrubbery, walks, etc.) and color selections. After completion of the model, present it to your counselor for approval.

    2. Structural Model : Build a model showing corner construction of a wood frame building to a scale of 1 1/2"=1'0" (8:1 Metric). All structure shown must be to scale. Cardboard or flat sheet woodstock may be used for sheeting or flooring on the model. Review with your counselor the problems you encountered in gathering the materials and supporting the structure. Be able to name the parts of the wall section, such as stud, sole plate, bridging, rafter, subfloor, girder, and joist.

    3. Process Model: Build a model showing the plumbing system in your house. Show hot and cold water supply, all waste returns, and venting to a scale of 3/4"=1'0" (15:1 Metric). Talk to your counselor about how to begin this model, present the scale and the materials you will use. After completion, present the model to your counselor and be prepared to discuss any problems you had building this model.

    4. Mechanical Model: Build a model of a mechanical device that should use at least two of the five simple machines. After completion of the model, present it to your counselor. Be prepared to discuss materials used, the machine's function and use, and any particular difficulty you may have encountered.

    5. Industrial Model: Build a model of an actual passenger-carrying vehicle to a scale of 1"=1'0" or ½" = 1'0" (10:1 or 25:1 Metric). Take the dimensions of the vehicle, and record the important dimensions. Draw the top, front, rear, and sides of the vehicle to scale. From your plans, build a model of the vehicle to scale. From your plans, build a model of the vehicle and finish in a craftsmanlike manner. Discuss with your counselor the most difficult part of completing this model.

  5. List at least six occupations in which modelmaking is used and discuss with your counselor some career opportunities in this field.

Merit badge requirements courtesy of Troop 586 Farmington